Bring Rustic and Reclaimed warmth into your space

If you've been on the hunt for something chunky, rustic

and best of all.. recycled and unique,

you may have just found your shelf!

Our chunky Oregon Pine was salvaged from an old Perth home. It was used as a structural timber and It features tight straight grains and the occasional knot.

Being a recycled timber, each piece is different and will vary in
grain and colouring, but generally the top of the shelf is a medium amber/rust coloured tone and the edge will feature lots of nail holes, texture and markings that show its age.  

The shelf in the photo features some light stripey markings, but not every piece features these.  Please let us know your preferences and we'll see if we can accommodate.

Please check through all the photos and take a look at what it looks like in its raw form.

If you prefer certain features, please email us prior to ordering and we'll do our best to find a suitable piece for your aesthetic.

 **** Please Note Prior to purchase ****
**** This shelf is made to order ****

For Free Shipping (Australia Only): Select from Lengths 40cm - 70cm 

A great pair of shelves to enliven your space and blend into the walls. 
The smooth, low sheen finish makes it a perfect set for a kitchen or bathroom area.  

Glacial Oak has a distinctive light pinkish/salmon tone which makes for a nice accent to any modern interior.  
Sanded to a smooth finish and sealed with water based wood sealer.

If you would like to customise these shelves, just send us an email at hello@floatingshelvesaustralia.com  and we'll send you a quote.

Our floating shelves are suitable for brick walls and also gyprock.
If you have gyprock, the wall rods will need to drill into the timber wall studs.
(I can drill to match your stud spacing.) You will need a stud finder to locate the studs.
Just send us a message with the spacings from centre of stud to centre of stud.

Australian Standard wall studs are 450mm - 600 mm apart

*PLEASE NOTE: Our hardware will not drill into metal studs.
Please check that your studs are not metal, prior to purchase :)

**Please appreciate that the holes in the back of your piece are drilled by hand.  Drilling through timber takes a lot of strength, power and experience. This is not factory made, in fact its made at from our home workshop in the Perth hills.  So please note that the holes in the back of your piece may look a little rustic and this is what handmade  'human made' is all about! :)

USA Conversions (approx) Please email us if you need a custom length

40cm =  15 1/2"   50cm =  19 1/2"   60cm = 23 1/2"  70cm = 27 1/2"

If you need longer lengths, please see our other Oregon Pine Listing with flat rate shipping cost.

Depth: 27 cm  (or 10  1/2 inches)

Thickness: 4.2 - 4.5 cm (or  1  1/2 inches to 1  3/4 inches)

- Ready to mount.

- Holes drilled in back of the shelf. (Can be drilled to required spacing if needed.)

- Includes High Quality Wall Rods with instructions

- Sealed in water based wood Sealer.

Please allow 10 weeks turn around to make.

FREE SHIPPING AUSTRALIA-WIDE FOR LENGTHS 40cm - 70cm

 Need a Custom size? Just email us for a quote on ibdenys@yahoo.com.au

Our floating shelves are suitable for brick walls and also gyprock.

If you have gyprock, the wall rods will need to drill into the timber wall studs.
(Ivan can drill to match your stud spacing.) Please check that you have at least 2 timber studs to drill into.

You will need a stud finder to locate the studs.
Just send me a message with the spacings from centre of stud to centre of stud.

Australian Standard wall studs are 450mm - 600 mm apart

*PLEASE NOTE: Our hardware will not drill into metal studs.
Please check that your studs are not metal, prior to purchase :)