Chunky floating shelf Reclaimed Oregon Pine Rustic
If you've been on the hunt for something chunky, rustic
and best of all.. recycled and unique,
you may have just found your shelf!
Our chunky Oregon Pine was salvaged from an old Perth home. It was used as a structural timber and It features tight straight grains and the occasional knot.
Being a recycled timber, each piece is different and will vary in
grain and colouring, but generally the top of the shelf is a medium amber/rust coloured tone and the edge will feature lots of nail holes, texture and markings that show its age.
The shelf in the photo features some light stripey markings, but not every piece features these. Please let us know your preferences and we'll see if we can accommodate.
Please check through all the photos and take a look at what it looks like in its raw form.
If you prefer certain features, please email us prior to ordering and we'll do our best to find a suitable piece for your aesthetic.
** Flat Shipping rate $39 Select from Lengths 80cm - 160cm
If you need longer lengths, please email us at firstname.lastname@example.org and we'll send you a quote.
Depth: 27 cm
Thickness: 4.2 - 4.5 cm
- Ready to mount.
- Holes drilled in back of the shelf. (Can be drilled to required spacing if needed.)
- Includes High Quality Wall Rods with instructions
- Sealed in water based wood Sealer.
Please allow 10 weeks turn around to make.
Our floating shelves are suitable for brick walls and also gyprock.
If you have gyprock, the wall rods will need to drill into the timber wall studs.
(Ivan can drill to match your stud spacing.) Please check that you have at least 2 timber studs to drill into.
You will need a stud finder to locate the studs.
Just send me a message with the spacings from centre of stud to centre of stud.
Australian Standard wall studs are 450mm - 600 mm apart
*PLEASE NOTE: Our hardware will not drill into metal studs.
Please check that your studs are not metal, prior to purchase :)